Sticker printing presses are classified according to the way the imprint label printing unit is different, can be divided into self-adhesive label printing platen type sticker printing, round sticker applanation Rotary-type printing press and printing self-adhesive labels. First, the platen type adhesive label printer, can be summarized as the basic model and the standard two models. The basic model of the main features are: Printing - Film - rewinding, Printing - Stamping - rewinding, Printing - Die - rewinding. 1, the basic label printing platen mainly consists of feeding parts, printing parts, film / stamping / die cut parts, feed (film or foil) parts, guide roller and rewinding, waste discharge components. As a platen-type printing press, so web feed member in the form of intermittent motion, so the substrate simultaneously or gold foil embossing and laminating, die cutting at rest. Applicable Printing Label Type: This type of simple structure, easy adjustment, Dongguan sticker design, but the accuracy is not high, are the primary models, mainly the general level of self-adhesive label printing. 2, standard label printer platen is carried out on the basis of the basic model of continuous improvement and perfection, with essentially the same basic components, but the printing unit, film (stamping) parts and die-cut parts individually set, when printing things simultaneously embossing, hot stamping and die-cutting at rest. Meanwhile, hot components can also be used as coating effect. Label printer type copper and zinc can be customized version of Dongguan stickers can also be used resin version, is the ideal equipment Dongguan adhesive labels, mostly domestic use of such models. A security sticker Note: 1. If you uncover security label or scratch when improper digital can not query can be used to label the surface of other anti-counterfeiting technology as the basis to determine the authenticity of the judgment; 2. To verify security Paste the Effects tab, and then lift shall be posted 24 hours later. 3. Before using security labels posted on the anti-sticker retention time should not exceed six months. During the shelf sticker should sunscreen, anti-moisture, anti-high temperature, chemically contaminated items shall not mix. Two security sticker pasted: 1. anti-counterfeit labels affixed to the surface is smooth, flat, clean release backing paper. 2. Extraction security sticker from the backing paper sticky discharge, the release should be taken along the sticker to the back edge of the security label folded straight part, so that security labels automatically tilt part from anti-paste paper. 3. extracts from the anti-tilt logo pasted on paper, hands should be clean, not with dust Dongguan stickers stickers, oil stains and other hand contact with the underlying surface adhesive security labels should not be too much , with just the right moderate intensity, to avoid damage to the bottom of the viscosity of identity; extracting security label, it shall follow the normal rules of lift, not forcibly pull, and the speed is not too fast, too fast, it is easy to damage the security label; strictly prohibited from counterfeiting pull from the security label sticker. 4. Paste the security label is affixed to the surface to be cleaned, contraindications dust, oil and water stains, etc; when the logo is affixed to the surface of the object, the application of finger pressure to force the formation of anti-counterfeit labels, security labels so that the surface with the stick fully bonded. Dongguan customized sticker printing _ _ Rong Yi Dongguan stickers provided by the Dongguan City-art printing Limited. Dongguan Wing Arts Printing Co. (www.ylys1288.com) is Dongguan, a leader in adhesive products, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs. In Wing art printing leadership with the staff warmly welcome all inquiries negotiations to create art printing wing a better future.